Staleks

The working part: Remover, Rounded pusher
Purpose: for manicure and pedicure
Material: Stainless steel

Purpose: for manicure and pedicure

The working part: Remover, Rounded pusher
Diameter: 6 mm
Purpose: for manicure and pedicure
Material: Stainless steel

The working part: Rectangular pusher, Rounded pusher
Diameter: 6 mm
Purpose: for manicure and pedicure
Material: Stainless steel

• The working part “loop” is used to cleanse the nail plate from pterygium
• The working part, “flat straight pusher,” is designed to lift and push back rough and heavily overgrown cuticles
• Corrugated handle improves the fixation of the tool in the technician’s hand.
• Pleasant to the touch matte surface of the handle
• Professional manual sharpening
• Stainless steel 08Х18Н10 (AISI 304)

The working part: Rectangular pusher, Loop
Purpose: for manicure and pedicure
Diameter: 6 mm
Material: Stainless steel

• Diamond nozzle for hardware manicure/pedicure.
• Head diameter 4 mm / Working part 12 mm
• Red notch with soft abrasiveness for delicate processing of skin, suitable for work by beginners and experienced technicians.
• The “sharp pear” shape is intended for processing the cuticle and lateral nail folds, as well as for cleansing the nail plate from the epidermis.
• Combines the function of a ball and a sharp flame.
• High-quality diamond coating.
• Can be subject to all types of sterilization and disinfection.
• Corrosion resistant

In manicure:

• Lifting and removing cuticles.
• Processing of lateral nail folds.
• Removal of the pterygium.
• Opening of sinuses.
• Processing of periungual sinuses.
• Polishing the nail plate

In pedicure:

• Opening and polishing cracks.
• Processing and removal of calluses.

Grit: red (fine grit)

Purpose: for manicure and pedicure

Made from high-quality materials. The technology of applying diamond sand allows us to avoid all the asperities on the working part surface of the drill bits and makes it safe for clients.

Staleks diamond drill bits can be disinfected and sterilized.

• Сarbide nozzle for hardware manicure/pedicure for left-handed users.
• Head diameter 6 mm / Working part 14 mm
• Cutting edges are directed counterclockwise (reverse).
• Red notch of soft hardness.
• Shape “corn” for the correction of artificial nails, removal of gel polish and hard coatings.
• It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.

In manicure:

• Correction of extended nails.
• Preparation for the extension of artificial nails.
• Correction of the nail plate.
• Neatly cuts the material and leaves a flat surface.
• In the process of work, the material removes in the form of tiny chips, not as dust.

In pedicure/podology:

• Processing of keratinized skin areas.
• Processing of corns and calluses.
• High-quality metal.
• Can be subject to all types of sterilization and disinfection.
• Corrosion resistant.

• Steel nozzle for hardware manicure/pedicure, safe.
• A unique nail drill bit has 6 edges and connects at a soft angle at the end of the working part.
• The “nail cleaner” shape is intended for the safe removal of pterygium, cleansing of sinuses, delicate processing of cuticles, and removal of keratinized skin areas.
• Designed to work with natural nail plates.
• It is important to comply with the recommended speed requirements.

In manicure:

• Lifting the cuticle.
• Opening of sinuses.
• Removal of the pterygium.

Set “Clean skin” (uno + oval with 19 holes + double-ended loop)

• A set of three tools for mechanical cleaning of the skin at home.
• The working part “Uno ” is designed for cleaning closed skin pores.
• The working part, “Oval with holes,” has a classic shape with 19 holes.
• Two shapes and sizes of the working part “Loop”.
• Reduced risk of skin injury due to smooth, polished edges of the working part.
• Comfortable handle with notches for fixing the tool in your hands.
• Additional protection of the instrument against corrosion due to surface polishing with goi paste.
• Stainless steel.
• Not recommended for sterilization in a dry heat oven and autoclave.
• Can be subject to disinfection with special agents.
• Recommended for home care.

• Beauty care double-ended tool (uno + oval with 15 holes).
• For mechanical skin cleaning.
• The working part, “Oval with holes,” has an elongated shape.
• The working part “Uno” is designed for cleaning closed skin pores.
• The classic size of the hole of the uno.
• Reduced risk of skin injury due to smooth, polished edges of the working part.
• Corrugated handle improves the fixation of the tool in the hand.
• Additional resistance to corrosion due to polishing with goi paste.
• High-alloy stainless steel.
• Resistant to sterilization in a dry heat oven and autoclave.
• Can be subject to disinfection with special agents.

• Beauty care double-ended tool (uno + oval with 19 holes).
• For mechanical skin cleaning.
• The working part, “Oval with holes,” has a classic shape.
• The working part “Uno” is designed for cleaning closed skin pores.
• The classic size of the hole of the uno.
• Reduced risk of skin injury due to smooth, polished edges of the working part.
• Corrugated handle improves the fixation of the tool in the hand.
• Additional resistance to corrosion due to polishing with goi paste.
• High-alloy stainless steel.
• Resistant to sterilization in a dry heat oven and autoclave.
• Can be subject to disinfection with special agents.
  

• Beauty care double-ended tool (uno + vidal needle).
• For mechanical skin cleaning.
• Professional sharpening of the vidal needle.
• The classic size of the hole of the uno.
• Reduced risk of skin injury due to smooth, polished edges of the working part.
• Corrugated handle improves the fixation of the tool in the hand.
• Additional resistance to corrosion due to polishing with goi paste.
• High-alloy stainless steel.
• Resistant to sterilization in a dry heat oven and autoclave.
• Can be subject to disinfection with special agents.
  

• Beauty care double-ended tool (uno + vidal needle).
• For mechanical skin cleaning.
• Professional sharpening of the vidal needle.
• Increased size of the hole of the uno.
• Reduced risk of skin injury due to smooth, polished edges of the working part.
• Corrugated handle improves the fixation of the tool in the hand.
• Additional resistance to corrosion due to polishing with goi paste.
• High-alloy stainless steel.
• Resistant to sterilization in a dry heat oven and autoclave.
• Can be subject to disinfection with special agents.
  

• Beauty care double-ended tool (uno + vidal needle).
• For mechanical skin cleaning.
• Professional sharpening of the vidal needle.
• Increased size of the hole of the uno.
• Reduced risk of skin injury due to smooth, polished edges of the working part.
• Corrugated handle improves the fixation of the tool in the hand.
• Additional resistance to corrosion due to polishing with goi paste.
• High-alloy stainless steel.
• Resistant to sterilization in a dry heat oven and autoclave.
• Can be subject to disinfection with special agents.
  

• Ergonomic design of the work part is perfect for both manicure and pedicure
• Clean and precise cut due to manually sharpened cutting edges
• Exceptional metal hardness allows nippers to stay sharp for longer
• Comfortable grip due to smaller curved handles
• Fine pivot surface sanding guarantees smooth, seamless stroke
• Additional corrosion resistance due to polishing with GOI grinding paste
• Medical grade stainless steel

BLADE LENGTH: 5 mm | 0.20"
LENGTH OF HANDLES (FROM THE HINGE): 8 cm
PURPOSE: for manicure and pedicure
HRC HARDNESS, UNITS: 48-51
CUTTING EDGES: tilted
MATERIAL: Stainless steel

• Ergonomic design of the work part is perfect for both manicure and pedicure
• Clean and precise cut due to manually sharpened cutting edges
• Exceptional metal hardness allows nippers to stay sharp for longer
• Comfortable grip due to smaller curved handles
• Fine pivot surface sanding guarantees smooth, seamless stroke
• Additional corrosion resistance due to polishing with GOI grinding paste
• Medical grade stainless steel

BLADE LENGTH: 8 mm | 0.30"
LENGTH OF HANDLES (FROM THE HINGE): 8 cm
PURPOSE: for manicure and pedicure
HRC HARDNESS, UNITS: 48-51
CUTTING EDGES: tilted
MATERIAL: Stainless steel

• Nippers for skin.
• Blade length 8 mm | 0.3″.
• The convenient shape of the working part with a small protrusion, “heel”.
• Neat and precise cut thanks to sharp cutting edges, sharpened manually.
• Comfortable ergonomic handles.
• Reliable fixation of the tool in the hand.
• The double spring is durable and provides a soft stroke of the tool.
• Additional resistance to corrosion, which is provided by polishing with GOI paste.
• Stainless steel.
• Not recommended for sterilization in a dry.
• Heat oven and autoclave.
• Can be subject to disinfection with a special agent.
• Designed for manicures and pedicures.
• Recommended for home care

BLADE LENGTH: 8 mm | 0.3″
LENGTH OF HANDLES (FROM THE HINGE): 8 cm
CUTTING EDGES: tilted
HRC HARDNESS, UNITS: 48-51
MATERIAL: Stainless steel

• Nippers for skin.
• Blade length 11 mm | 0.43″.
• The convenient shape of the working part with a small protrusion, “heel”.
• Neat and precise cut thanks to sharp cutting edges, sharpened manually.
• Comfortable ergonomic handles.
• Reliable fixation of the tool in the hand.
• The double spring is durable and provides a soft stroke of the tool.
• Additional resistance to corrosion, which is provided by polishing with GOI paste.
• Stainless steel.
• Not recommended for sterilization in a dry.
• Heat oven and autoclave.
• Can be subject to disinfection with a special agent.
• Designed for manicures and pedicures.
• Recommended for home care

BLADE LENGTH: 11 mm | 0.43″
LENGTH OF HANDLES (FROM THE HINGE): 8 cm
CUTTING EDGES: tilted
HRC HARDNESS, UNITS: 48-51
MATERIAL: Stainless steel

• Nippers for skin.
• Blade length 14 mm | 0.55″.
• The convenient shape of the working part with a small protrusion, “heel”.
• Neat and precise cut thanks to sharp cutting edges, sharpened manually.
• Comfortable ergonomic handles.
• Reliable fixation of the tool in the hand.
• The double spring is durable and provides a soft stroke of the tool.
• Additional resistance to corrosion, which is provided by polishing with GOI paste.
• Stainless steel.
• Not recommended for sterilization in a dry.
• Heat oven and autoclave.
• Can be subject to disinfection with a special agent.
• Designed for manicures and pedicures.
• Recommended for home care

BLADE LENGTH: 14 mm | 0.55″
LENGTH OF HANDLES (FROM THE HINGE): 8 cm
CUTTING EDGES: tilted
HRC HARDNESS, UNITS: 48-51
MATERIAL: Stainless steel