107 products
107 products
Sort by:
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm
- Yellow notch of very soft hardness.
- A “frustum” shape is for the correction of an artificial nail, removal of artificial material, processing of the skin of the feet and toe pads.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal – can be subject to all types of sterilization and disinfection – corrosion resistant.
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm
- Purple notch of coarse hardness.
- A “frustum” shape is for the correction of an artificial nail, removal of artificial material, processing of the skin of the feet and toe pads.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal – can be subject to all types of sterilization and disinfection – corrosion resistant.
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm
- Red notch of soft hardness.
- Shape “corn” for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure:
- Correction of extended nails.
- Preparation for the extension of artificial nails.
- Correction of the nail plate.
- Neatly cuts the material and leaves a flat surface.
- In the process of work, the material removes in the form of tiny chips, not as dust.
In pedicure/podology:
- Processing of keratinized skin areas.
- Processing of corns and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 5 mm/ Working part 13 mm
- Blue notch of medium hardness.
- Shape “corn” for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure:
- Correction of extended nails.
- Preparation for the extension of artificial nails.
- Correction of the nail plate.
- Neatly cuts the material and leaves a flat surface.
- In the process of work, the material removes in the form of tiny chips, not as dust.
In pedicure/podology:
- Processing of keratinized skin areas.
- Processing of corns and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm/ Working part 14 mm
- Blue notch of medium hardness.
- Shape “corn” for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure:
- Correction of extended nails.
- Preparation for the extension of artificial nails.
- Correction of the nail plate.
- Neatly cuts the material and leaves a flat surface.
- In the process of work, the material removes in the form of tiny chips, not as dust.
In pedicure/podology:
- Processing of keratinized skin areas.
- Processing of corns and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm
- Yellow notch of very soft hardness.
- Shape “corn” for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure:
- Correction of extended nails.
- Preparation for the extension of artificial nails.
- Correction of the nail plate.
- Neatly cuts the material and leaves a flat surface.
- In the process of work, the material removes in the form of tiny chips, not as dust.
In pedicure/podology:
- Processing of keratinized skin areas.
- Processing of corns and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 5 mm/ Working part 13 mm
- Purple notch of coarse hardness.
- Shape “corn” for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure:
- Correction of extended nails.
- Preparation for the extension of artificial nails.
- Correction of the nail plate.
- Neatly cuts the material and leaves a flat surface.
- In the process of work, the material removes in the form of tiny chips, not as dust.
In pedicure/podology:
- Processing of keratinized skin areas.
- Processing of corns and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm/ Working part 14 mm
- Purple notch of coarse hardness.
- Shape “corn” for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure:
- Correction of extended nails.
- Preparation for the extension of artificial nails.
- Correction of the nail plate.
- Neatly cuts the material and leaves a flat surface.
- In the process of work, the material removes in the form of tiny chips, not as dust.
In pedicure/podology:
- Processing of keratinized skin areas.
- Processing of corns and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm/ Working part 14 mm.
- Green notch of coarse hardness.
- A “frustum” shape is for the correction of an artificial nail, removal of artificial material, processing of the skin of the feet and toe pads.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal – can be subject to all types of sterilization and disinfection – corrosion resistant.
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 5 mm / Working part 13 mm
- Red notch of soft hardness.
- Shape “corn” for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure:
- Correction of extended nails.
- Preparation for the extension of artificial nails.
- Correction of the nail plate.
- Neatly cuts the material and leaves a flat surface.
- In the process of work, the material removes in the form of tiny chips, not as dust.
In pedicure/podology:
- Processing of keratinized skin areas.
- Processing of corns and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
- Steel nozzle for hardware manicure/pedicure, safe.
- A unique nail drill bit has 6 edges and connects at a soft angle at the end of the working part.
- The “nail cleaner” shape is intended for the safe removal of pterygium, cleansing of sinuses, delicate processing of cuticles, and removal of keratinized skin areas.
- Designed to work with natural nail plates.
- It is important to comply with the recommended speed requirements.
In manicure:
- Lifting the cuticle.
- Opening of sinuses.
- Removal of the pterygium.
SERIES EXPERT – designed for professional use by technicians of manicure and pedicure. Differs in a wide variety of shapes, sizes, and grit values of working parts.
- Carbide nozzle for hardware manicure / pedicure
- Head diameter 5 mm / Working part 13,5 mm
- Blue notch of medium hardness
- “Flame” shape is for the correction of the artificial nails, removal of artificial material, and processing of the skin of the feet and toe pads.
-
It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure: - Correction of thin artificial material
-
Processing of detachments in the lateral nail folds
In pedicure/podology: processing of cornification and calluses
- High-quality metal
- Can be subject to all types of sterilization and disinfection
- Corrosion resistant
Grit: red
Purpose: for manicure and pedicure
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm.
- Blue notch of notch of medium hardness.
- Shape “pine cone” for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
Purpose: for manicure and pedicure
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm.
- Black notch of coarse hardness.
- Shape “pine cone” for the correction of artificial nails, removal of gel polish and hard coatings.
- It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
Purpose: for manicure and pedicure
Staleks
Staleks Carbide nail drill bit "cone" blue, 6 mm for left-handed users
2749
$27.49
Unit price perStaleks
Staleks Carbide nail drill bit "cone" blue, 6 mm for left-handed users
2749
$27.49
Unit price per- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm
- Blue notch of medium hardness.
- “Cone” shape is for correction of the artificial nail, removal of artificial material, and processing of the skin of the feet and toe pads.
-
It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
Purpose: for manicure and pedicure
Staleks
Staleks Carbide nail drill bit "cone" red, 6 mm for left-handed users
2749
$27.49
Unit price perStaleks
Staleks Carbide nail drill bit "cone" red, 6 mm for left-handed users
2749
$27.49
Unit price per- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm
- Red notch of soft hardness.
- “Cone” shape is for correction of the artificial nail, removal of artificial material, and processing of the skin of the feet and toe pads.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
Purpose: for manicure and pedicure
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm
- Red notch of soft hardness.
- “Cone” shape is for correction of the artificial nail, removal of artificial material, and processing of the skin of the feet and toe pads.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
Purpose: for manicure and pedicure
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 2,3 mm / Working part 14 mm.
- Blue notch of medium hardness.
- “Cone” shape is for correction of the artificial nail, removal of artificial material, and processing of the skin of the feet and toe pads.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
Purpose: for manicure and pedicure
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm
- Blue notch of medium hardness.
- “Cone” shape is for correction of the artificial nail, removal of artificial material, and processing of the skin of the feet and toe pads.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
Purpose: for manicure and pedicure
- Carbide nozzle for hardware manicure/pedicure.
- Head diameter 6 mm / Working part 14 mm
- Green notch of coarse hardness
- “Cone” shape is for correction of the artificial nail, removal of artificial material, and processing of the skin of the feet and toe pads.
In manicure:
- Correction of thin artificial material.
- Removal of material excesses.
- Processing of detachments in the lateral nail folds.
In pedicure/podology:
- Processing of cornification and calluses.
- High-quality metal.
- Can be subject to all types of sterilization and disinfection.
- Corrosion resistant.
Purpose: for manicure and pedicure